contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.

23 Chemin de l'Ecole
G3B 0N3
Canada

(418)-802-5172

We are a helmet painting and graphics specialist. We specialize in custom helmet painting. We have over 15 years of experience in custom painting. Patrice Harvey is the artist creating those helmets.

Arai SK-6 (Karting Specific helmet)

Arai Helmets and Accessories

WE SELL HELMETS ONLY FOR CUSTOM PAINTING. WE DO NOT STOCK ANY HELMETS, THEY ARE ORDERED BY THE PIECES BEFORE GETTING CUSTOM PAINTED ONLY FOR YOU.

Arai SK-6 (Karting Specific helmet)

arai-sk-6.jpg
arai-sk-6.jpg

Arai SK-6 (Karting Specific helmet)

810.00

The SK-6 model is based largely on Arai's GP-6 open wheel auto racing helmets worn by top drivers in the Formula-1, CART, IRL and NASCAR. Utilizing the same shell mould and shield as the GP-6, the SK6 gives the look most desired by Karting racers while incorporating new specific features which function more effectively under Kart racing conditions. Snell KA certified for Karting Competitions. .

This is a Karting Helmet and not approved for Auto Racing 
Rated: Snell K-2010 Homologated 
Anti-Mist/Cooling Venting System Nylon Liner-- Not only is the liner material lighter, it also breathes better, absorbs more sweat and allows the ventilation system to function more effectively at Karting speeds. The nylon material also washes much more easily to allow the helmet to stay fresher, longer.

Size:
Quantity:
Add To Cart
  • Complex Laminate Construction (CLC)
  • Enhanced Hyper Ridge shell strengthening in lower section
  • Multi-Density Hybrid inner shell
  • Larger opening for increase ease when taking helmet on or off
  • 4-point Inlet / Exhaust Ventilation System
  • Dual inlet chin vent
  • Two larger ventilation scoops (holes increased from 7.8mm to 10mm)
  • Two larger ventilation slots at rear covered by DDL Duct (holes increased from 7,8mm to 10mm)
  • Visor locking system with lever for easier opening (as recommended by IRL)
  • 3mm thick, two-dimensional visor with F1 aluminium visor system prepared for the use of tear-offs (visor not interchangeable with GP-5)
  • Improved visor pivot kit for better aerodynamics and better visor operation
  • Smaller portal visor aperture (60mm)
  • Coolmax® washable nylon lining
  • Snell K2005 approved
  • White only
  • Sizes: XS-XXL